Custom Ford F-150 4x4 2.7L - Steve's Build

Custom Ford F-150 4x4 2.7L - Steve's Build

Josh GilbertApr 30, '20

This post contains affiliate links to products. We may receive a commission for purchases made through these links.

THEBUILDER

Instagram Profile

Name: Steve

Location: Windsor, Ontario CA

Instagram:  @2.7_F150

THETRUCK

2016 Ford F-150 4X4 2.7 Eco

I bought my F-150 brand new three years ago and to be honest I was going to leave the truck alone (that’s what I told the wife), but once I got started I never stopped.

THEBUILD

First thing I did is I ended up leveling the truck 2.5” and ran some raptor take offs with some 315/70/17. About a year later I decided I was tired of the leveled truck, so I went ahead and dropped it 3”-3” with a crown coilover setup.

About 5 months later I wanted to go even lower so I went full Bell Tech 1000sp 3/5 drop. Well it didn’t end there..

I had 2014 black fx4 wheels on it, then traded them for some KMC 24x9.5 +12 offset and 295/35/24 Lexani LX-Nine tires.

I also ended up getting a great deal on some Anzo head lights that I ripped apart and got custom painted and threw some demon eyes in them, some spyder tails, with a raptor plaque wrapped black with white letters, the front end is also wrapped down the middle with the grill.

I did an F-250 center console swap, added a sub and two more speakers, with some custom floor mats.

Performance wise: Tuned by 5 star, 87/91/93 custom tunes I built my own exhaust, went catless into full 3” into a Black Widow Venom 300 Muffler, Rat stat 170, K&N Cold Air Intake, and Road master active suspension.


Build Photo
Build Photo
Build Photo
Build Photo
TruckHub Certified

Leave a comment

Please note, comments must be approved before they are published